Albie's Introduction.

A place where new members can introduce themselves and the forum members can get to know them.
Forum rules
Please the introduction first.

When posting topics on the forum please make sure:
  • ● The posts are not political
  • ● The posts are not about religion
  • ● Please keep posts civil and don't be nasty to other members
Include your real location in your user profie please.
User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Albie's Introduction.

Post by albiekreef » Tue 05 Apr 2016, 22:11

Dankie Ters....dink ek sal dit maar in ingels doen sodat almal kan verstaan.

Right....I live in a small town in the northern cape and I am a pump attendant at our local garage. Not completely the ideal job for a car enthusiast but close enough hey. Currently drive a 1987 Ford Sierra 2.0.....nothing much done to it yet except for mags and tyres, added a digital rev counter as mine went south.

Got a whole list of stuff I want to do to it, but have to take it one thing at a time as I need to buy the stuff as I have a bit of cash saved from time to time. Kind of got a picture of what I want, but I like doing proper homework and research prior to anything I do. That is why I am looking for an easy to fit with little modification needed caliper brake system for front and rear that will fill the 17" mags nicely. Okay enough babble for now.....


I will be checking out these forums as they are very informative and everyone seems flippen nice and helpful.

Waiting to get chatting with you all.

Thanks for the warm welcome Ters.

User avatar
ters
Posts: 4203
Joined: Thu 19 Jan 2012, 19:39
Location: Pretoria

Re: Albie's Introduction.

Post by ters » Wed 06 Apr 2016, 05:43

Welcome Albie! :mrgreen:

Ek het jou voorstelling geskuif na ons nuwe lid bekendstelling afdeling. Nou met jy net vir ons paar foto's opsit van jou Ford?

Ters.
When it comes to the wife its easier to beg for forgiveness than ask for permission!
AMC Forum now accessible on Tapatalk! http://www.tsclassicclinic.co.za/

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Mon 11 Apr 2016, 09:34

Dankie....ek gaan kyk om vanaand n paar fotos op te sit. Was bietjie bedrywig gewees die laaste paar dae. Sal kyk vir n paar wat nie te swak lyk nie...die ou kort bietjie tlc.

User avatar
marnus
Posts: 337
Joined: Mon 21 Jan 2013, 09:16
Location: Zwartkop

Re: Albie's Introduction.

Post by marnus » Mon 11 Apr 2016, 10:15

Hi Albie

Welcome!!
do you want to go V6 or V8 or turbo the 2.0?
Regards

Marnus Nortje

1989 Ford Sierra 308 V8
2005 Ford Ranger 2.5TD DC
2004 E46 320i BMW - ex

User avatar
Johann65
Posts: 6288
Joined: Sun 24 Aug 2008, 13:07
Location: Rothdene, Gauteng

Re: Albie's Introduction.

Post by Johann65 » Mon 11 Apr 2016, 10:59

Welkom Albie! :D
Jy gaan baie soorte hier kry! Van Arm na Ryk en Oud en Jonk! Politiek is ongekend!! So jy sal altyd welkom Wees!! :D
Johann
Member No: 209
Ah! Yes I remember it well! (Only GM's!)
1966 Opel Rekord L CLASSIC SEDAN Current Project

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Sat 16 Apr 2016, 10:59

Dagsê almal.

Jislaaik ek is jammer dat ek nou nog nie fotos gelaai het nie...net te bdrywig en kom nie by my pc uit nie. Ek beplan om die 2.0 te hou.....vir nou wil ek net EFI toe oorgaan en dalk later turbo opsit of dalk ootgaan na n Mazda EGI motor met n turbo op....ons kyk maar wat die toekoms inhou. Ek sal my bes probeer om in die komende week n aand af te vat sodat ek bietjie fotos kan opsit.

Dankie dat julle almal my klaar so tuis laat voel hier.

User avatar
hanov0
Posts: 880
Joined: Sat 19 Jan 2008, 19:51
Location: Fourways RSA

Re: Albie's Introduction.

Post by hanov0 » Sun 17 Apr 2016, 11:45

Hi, nice to see your into Fords
Let me know if you need spares I have a Sierra that I have put on the back burner.
Too many irons in the fire.....
Cheers
Hano'

For custom Aluminum work www.saicperformance.com

Image

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Sun 17 Apr 2016, 12:34

Thans a lot....will shout if I need something. At this moment the only thing bugging me is to find bigger front and rear brake calipers and discs that will not require huge modifications to fit...need something that will fill a 17'' rim nicely. Once I figured that out I can move to the next step.

Will keep you guys posted.

Sent from my SM-A500F using Tapatalk

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Sun 24 Apr 2016, 01:49

Okay...jammer vir die lank wag maar hier is n paar fotos voor die transformasie. Alles is net tydelik totdat ek als het en kan begin met die hele projek. Sal môre die res van die fotos opsit van al die veranderinge tot dusver.

Sent from my SM-A500F using Tapatalk
Attachments
uploadfromtaptalk1461455184435.jpg
uploadfromtaptalk1461455184435.jpg (91.51 KiB) Viewed 1980 times
uploadfromtaptalk1461455160837.jpg
uploadfromtaptalk1461455160837.jpg (92.15 KiB) Viewed 1980 times
uploadfromtaptalk1461455123773.jpg
uploadfromtaptalk1461455123773.jpg (89.17 KiB) Viewed 1980 times
uploadfromtaptalk1461455094000.jpg
uploadfromtaptalk1461455094000.jpg (90.15 KiB) Viewed 1980 times

User avatar
ters
Posts: 4203
Joined: Thu 19 Jan 2012, 19:39
Location: Pretoria

Re: Albie's Introduction.

Post by ters » Sun 24 Apr 2016, 06:51

Lekker Albie! :mrgreen:

Loeriersfontein is 'n klein dorpie ne? Interesting Windmill Museum you have in town!

Ters.
When it comes to the wife its easier to beg for forgiveness than ask for permission!
AMC Forum now accessible on Tapatalk! http://www.tsclassicclinic.co.za/

Post Reply

Social Media

     

Who is online

Users browsing this forum: No registered users and 4 guests