Albie's Introduction.

A place where new members can introduce themselves and the forum members can get to know them.
Forum rules
Please the introduction first.

When posting topics on the forum please make sure:
  • ● The posts are not political
  • ● The posts are not about religion
  • ● Please keep posts civil and don't be nasty to other members
Include your real location in your user profie please.
User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Tue 26 Apr 2016, 11:59

Jip already put in my order at oom David and oom Gideon for the cosworth one.


Sent from my SM-A500F using Tapatalk

User avatar
ZA Perana
Posts: 7292
Joined: Sun 15 Jul 2007, 18:01
Location: Cape Town

Re: Albie's Introduction.

Post by ZA Perana » Tue 26 Apr 2016, 22:30

Welcome to the forum. That's a very neat and tidy Sierra.
Alfa GTV 3.0
Ford Capri Perana V8
Chevy Lumina Supercharged

Wait not for tomorrow to do what can be done today, live each day for one knows not what the next day may hold.

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Wed 27 Apr 2016, 07:13

ZA Perana wrote:Welcome to the forum. That's a very neat and tidy Sierra.
Thank you very much. Got a few dents and little rust spots that irritates me but all will be fixed up good in time.

Sent from my SM-A500F using Tapatalk

User avatar
Johann65
Posts: 6288
Joined: Sun 24 Aug 2008, 13:07
Location: Rothdene, Gauteng

Re: Albie's Introduction.

Post by Johann65 » Wed 27 Apr 2016, 17:44

Hullo Albie,
Time and Patience! :D :D In my second year with the Opel and still a lot of work to be done!! :roll:
Groete Johann ;)
Member No: 209
Ah! Yes I remember it well! (Only GM's!)
1966 Opel Rekord L CLASSIC SEDAN Current Project

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Thu 28 Apr 2016, 13:03

Johann65 wrote:Hullo Albie,
Time and Patience! :D :D In my second year with the Opel and still a lot of work to be done!! :roll:
Groete Johann ;)
Dankie Johann

Ek is nou al so 5 jaar besig met die beplanning en navorsing van als wat ek wil doen. Kort kort duik iets nuuts op of iets loop skeef. Is nou in my finale aanloop. Al wat my nou nog n bietjie terughou is die agterste briek calipers en ook of ek n fuel injection top moet soek....oorweeg dit om my een top te laat aanpas by die efi intake se injector lobes.

Tyd sal wel alles bekend maak.

Groete
Albie

Sent from my SM-A500F using Tapatalk

User avatar
Shaunp
Posts: 378
Joined: Sun 30 Mar 2014, 15:32
Location: Secunda, Mpumalanga

Re: Albie's Introduction.

Post by Shaunp » Thu 28 Apr 2016, 20:40

Looking good
Magic happens.

User avatar
Shaunp
Posts: 378
Joined: Sun 30 Mar 2014, 15:32
Location: Secunda, Mpumalanga

Re: Albie's Introduction.

Post by Shaunp » Thu 28 Apr 2016, 20:42

Not sure if you already know. ..check under the battery box. The acid eats the metal and water gets into the firewall and carpets and starts to rot
Magic happens.

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Thu 28 Apr 2016, 21:22

Shaunp wrote:Not sure if you already know. ..check under the battery box. The acid eats the metal and water gets into the firewall and carpets and starts to rot
Hi Shaunp


Yep....already had that problem. Removed everything and had it fixed up quite good but only temporarily. Gonna strip it completely for a complete rust, dent and spray overhaul.

Thanks for pointing that out though....I knew this forum was gonna have some great people with a lot of great info.

Thanks guys.

Sent from my SM-A500F using Tapatalk

User avatar
Shaunp
Posts: 378
Joined: Sun 30 Mar 2014, 15:32
Location: Secunda, Mpumalanga

Re: Albie's Introduction.

Post by Shaunp » Fri 29 Apr 2016, 09:07

Awesome
Magic happens.

User avatar
albiekreef
Posts: 20
Joined: Mon 04 Apr 2016, 22:00
Location: Loeriesfontein

Re: Albie's Introduction.

Post by albiekreef » Tue 03 May 2016, 12:48

Guys I need help seriously. Where will I find parts for the brake calipers ? Rattle plates and guide pins for the rear calipers and all new rubber seals and grommets for front and rear calipers ?

Sent from my SM-A500F using Tapatalk

Post Reply

Social Media

     

Who is online

Users browsing this forum: No registered users and 12 guests