Transmission and Drivetrain.

[ters]

Post all tips/tutorials here.

Ters.

[Waterhond]

http://www.berrysweb.com/700-R4-Rebuild.htm

[coyote]

Good driveline info here:

http://www.hotrodhotline.com/md/html/dr ... monics.php

Coyote

[Danie Baby Cresida]

Hi All
To make things short and sweet, I built a corolla E70 facelift with a 3vzfe v6 connected to a w57 gearbox,Heads have been done mildly and gives 150kw
on the wheels,here is the question. when I shift from 2nd to 3rd under torque, It doesn't want to select, I have to literally take my foot off the throttle
for it to engage. the gearbox is brand new and it was fitted with a racing clutch. Any suggestions would be appreciated.

[ters]

Hi All
To make things short and sweet, I built a corolla E70 facelift with a 3vzfe v6 connected to a w57 gearbox,Heads have been done mildly and gives 150kw
on the wheels,here is the question. when I shift from 2nd to 3rd under torque, It doesn't want to select, I have to literally take my foot off the throttle
for it to engage. the gearbox is brand new and it was fitted with a racing clutch. Any suggestions would be appreciated.

How about an introduction, https://www.africanmusclecars.com/forum ... m.php?f=41 show some pics of your ride in the thread? Please do give feedback in this section when the issue is resolved....for future reference?

Have you joined this forum too? http://www.streetracing.co.za/forum/index.php

Ters.

[getafix]

OK, I've bit the bullet and got a 289 Ford V8. Now my question is which is the best gearbox to mate this engine to?
Target vehicle is an AC Cobra.

[jlebenon]

Manual or auto ?

[getafix]

Most likely auto 4spd - am too heavy on clutches to fit a manual

[Dennis BBC]

Hi All
I haven't been on this forum for some while now.
I hope someone can assist me. I have installed a new 6L80E transmission in my 2009 Lumina. We transferred the TCM from the old 'box into the new. I believe we transferred the fault too, as the TCM has the solenoids built in, and the old symptoms still exist. I am trying to install the new TCM but can't get a license in SA for the Tech 2 system. Can it be done with HP Tuners? Any advice would be most welcome. Many thanks in advance.