My Cortina Restoration has begun!
Re: My Cortina Restoration has begun!
Thanks for the tip!! i would have messed it up, so I will hang the doors and fenders instead of laying them on a table or flat surface like the boot and bonet!
I have picked out the paint and as soon as I have finished the other projects will focus on my BigSix and get it painted.
I have picked out the paint and as soon as I have finished the other projects will focus on my BigSix and get it painted.
Old Ford's don't Die, they just go Faster!
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
- 73Ranchero
- Posts: 736
- Joined: Thu 10 May 2012, 17:27
- Location: Lichtenburg, North-west
Re: My Cortina Restoration has begun!
Pleasure, I'm glad that it was in time, before you started painting. I only got the advise after the fact, no use then!
There's no substitute for cubic inches
Deon
Deon
Re: My Cortina Restoration has begun!
I have found forum's like this one very helpfull where you can learn from other peoples mistakes and not your own, and share your mistakes to help someone else.
Old Ford's don't Die, they just go Faster!
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
- zahistorics
- Posts: 4764
- Joined: Sun 12 Aug 2007, 13:53
- Location: Oxfordshire, United Kingdom
- Contact:
Re: My Cortina Restoration has begun!
Better yet - do it like the professionals.73Ranchero wrote:... I would just like to give a tip here, when you do the final spray-job and espesially if it's going to be metalic, try very hard to spray at the same angles. I'll explain... I stripped and resprayed my daughter's Uno in metallic blue a while ago. The car frame, much like your's in the last pics, was painted seperately and the doors and bonnet were off the car on drums. Although I painted everything at the same time, with the same paint, it did not match properly after re-assembly. The metallic particels in the paint have to set and dry at the same angle when you spray the door and mudguard, for example.
Spay the 'inside' - engine bay, door shuts etc. (anything that would be covered and made inaccessible by the panels) in colour.
Fit all doors and panels. Adjust all the panel gaps and shut lines so eveything is aligned and neat and even.
Spay edges and backs, wrapping paint around the edges to the 'outside'.
Close doors, bonnet and boot. Paint all the exterior bits. Treat entire areas, like the whole side of the car, a single item when spraying.
John - www.perana.org - Perana DVD
- jacodebeer
- Posts: 141
- Joined: Tue 13 Apr 2010, 07:58
- Location: Randfontein, Gauteng
Re: My Cortina Restoration has begun!
BIGSIX wrote:Ok Motor is starting to come together, put the stuff I could together as they were gathering dust.
Hi Johan, waar het jy jou engineering laat doen? in Randfontein?
Re: My Cortina Restoration has begun!
Engineering is gedoen in Krugersdorp Wes by Performance Balancers.
Old Ford's don't Die, they just go Faster!
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Re: My Cortina Restoration has begun!
Ok got some work done on the body side skirts and front spoiler.
I know this is not to the liking of most die hard Ford fans but the spoiler kit has grown on me from the first time I saw it 15yr back on the car and I will try my best not to make it into the Zef-Spotting tread.
Some pics of the progress.
I know this is not to the liking of most die hard Ford fans but the spoiler kit has grown on me from the first time I saw it 15yr back on the car and I will try my best not to make it into the Zef-Spotting tread.
Some pics of the progress.
Old Ford's don't Die, they just go Faster!
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Re: My Cortina Restoration has begun!
Hi Bigsix
I am sorry that I can't help, but I will definitively be with fingers crossed for your success.
Thanks for sharing. God Speed.
Throtle
I am sorry that I can't help, but I will definitively be with fingers crossed for your success.
Thanks for sharing. God Speed.
Throtle
When you Rev it, you know where you're going!
1970 Ford Escort on the way to be restored.
2010 Yamaha R6
Daily Yamaha Vino 50cc Rider
1970 Ford Escort on the way to be restored.
2010 Yamaha R6
Daily Yamaha Vino 50cc Rider
Re: My Cortina Restoration has begun!
Some more body work done, still a lot to do before I am happy with it.
Need to fit the motor and gearbox to see how much clearance I have with the carbs and trumpets and filters so did some port matching and painting of the heads.
now need to fit the gaskets and torque ever thing up.
Need to fit the motor and gearbox to see how much clearance I have with the carbs and trumpets and filters so did some port matching and painting of the heads.
now need to fit the gaskets and torque ever thing up.
Old Ford's don't Die, they just go Faster!
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Re: My Cortina Restoration has begun!
Redone the 2 X 38 Weber Carbs and mocked up my V8 Filter.
Not sure if I should run a single V8 Filter or run two separate square filter on the carbs? Any opinions?
Twin Setup without the links
Filter mock up?
Not sure if I should run a single V8 Filter or run two separate square filter on the carbs? Any opinions?
Twin Setup without the links
Filter mock up?
Old Ford's don't Die, they just go Faster!
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Hi, my name is Johan and I am a V-addict!
'97 Suzuki TL1000S - V2(SOLD)
'76 Ford Cortina XLE Bigsix 3.0 - V6
'90 Ford Sapphire 3.0 GLX - V6
'97 Mazda MX6 2.5i - V6
'96 Ford Courier D\C 350 16v - V8
Social Media
Who is online
Users browsing this forum: No registered users and 13 guests