MkII Cortina Perana V6 racer

Pictures of your muscle car!
User avatar
KSF
Posts: 325
Joined: Fri 07 Feb 2014, 15:07
Location: Western Cape

Re: MkII Cortina Perana V6 racer

Post by KSF » Thu 08 Dec 2016, 17:35

Not seen in these pics are the exhaust branches that I had wrapped in with the new non-asbestos type of bandage. It is now glassfibre based I think. Hopefully it will work as well and last as long as the older asbestos types.

It is not for any performance advantage that I have ever noticed, but rather to try and keep the underbonnet temperatures down. Things gets very hot in there under sustained running under power, so any and every bit helps.

Since the weekend, I have been crawling around under the car mostly with the exhaust system. No pics so far, I am not good with pics under the car. It would in theory be a lot easier to get it done by an exhaust shop, probably. But then I would first have to have the usual argument with the resident expert to get it done my way and probably still be unhappy with what I get and have to pay too much. So I am building it myself. In any case, I don't feel like the schlep of getting the car to such a place at this time of year.

Well, that is it all up to date now. I plan to try and get the exhaust done before I close up shop (so to speak) for the year. I will update as things happen, hopefully I can wrap up the Sierra quickly and get back to the Cortina build very early next year.

Below, just so this post is not without some pics, are the 5 engine bays "Old faithfull" has been in:

Early days, in JSCustom's drag Prefek.
PREFEK2.jpg
PREFEK2.jpg (142.4 KiB) Viewed 6420 times
Back with me, still in the Prefek.
IMGP1314.JPG
IMGP1314.JPG (135.25 KiB) Viewed 6420 times
It then changed hands a few times, ran once I think (so technically 6 cars) in another Sierra up in JHB somewhere.

Back with me again, this time after a stripdown and extensive rebuild, in the Fine Car Sapphire.
Image050Sm.jpg
Image050Sm.jpg (144.98 KiB) Viewed 6420 times
In the Sapphire it once lost a welsh plug, got so hot both heads and the block cracked. Extensive rebuild followed.

It was the first engine in the LS Capri.
PhnPic 239.jpg
PhnPic 239.jpg (77.5 KiB) Viewed 6420 times
The Capri got a new engine and after a brief rest on the floor again, it found a home in the Taunus.
Photo0637.jpg
Photo0637.jpg (100.13 KiB) Viewed 6420 times
When the Taunus got stripped, it found a home on the floor again for a couple years and now it is in the Sierra.
20161020_200650Sm.jpg
20161020_200650Sm.jpg (129.08 KiB) Viewed 6420 times
It had not been opened at all since the Sapphire days (2010 season in fact), so I am crossing everything it will run for at least a couple meetings.

User avatar
KSF
Posts: 325
Joined: Fri 07 Feb 2014, 15:07
Location: Western Cape

Re: MkII Cortina Perana V6 racer

Post by KSF » Tue 13 Dec 2016, 11:56

Last update for the year.... and in the spirit of Xmas, I'll start with a pic of something shiny and bright.
20161208_202142Sm.jpg
20161208_202142Sm.jpg (131.44 KiB) Viewed 6355 times
Ok try to ignore the mess my workbench is in at the moment, that is not so shiny and bright. This is the tailpiece for the Sierra, tacked together and ready to get welded. It is a big diameter piece of SS piping, much bigger than is actually required, but I like the look of it and the sound.


Here below is about as deep under the car as I have been with a cellhphone to snap a pic. The front sections all propped up in place and tack welded together.
20161208_202349Sm.jpg
20161208_202349Sm.jpg (108.56 KiB) Viewed 6355 times
Yes, it is a great deal of fun crawling into the confined space with a welding helmet on and trying to get in a position to weld. Thank goodness for auto-darkening helmets, it did take some of the guess work out of welding.

Pipe diameters, the first bits from the headers are 57mm, then joined by a custom made Y-piece. Ideally for this type of engine a single 68mm from there, but non-availability of silencers and bends in 68mm meant this one is 64mm. Still OK, not that much in it in any case.

From after the silencer (oval, about 400mm long) it starts its turn still in 64mm and then I added the shiny 76mm piece. The joint ended up being a bit messy, but it will work OK. I may go back there next year some time to neaten it up a bit.

And here below the bit I hope most other racers will get to see! :lol:
20161212_195808Sm.jpg
20161212_195808Sm.jpg (129.91 KiB) Viewed 6355 times
I did start it up again now that the pipe is complete. Sound is about as I expected and very similar to the Sapphire, as it would be since the engine is the same one and the pipes very similar.

So that is it for the year, I will take time to clean up the mess a bit before going on holiday. Hopefully next year I can wrap up the last bit of work on the Sierra (still have to make a shortlist, but it is close enough for that now) and get stuck into the Cortina.

User avatar
Killarney Racer
Posts: 731
Joined: Sat 12 Jan 2008, 21:23
Location: Cape Town

Re: MkII Cortina Perana V6 racer

Post by Killarney Racer » Mon 19 Dec 2016, 14:08

KSF, a fantastic thread. How do you manage to hold down a day job with all that activity? :lol: Imagine the thrill of getting the car on track and then competing against the LS Capri you built. Looking forward to seeing how you manage to race the Sierra and Cortina at the same time in the same event...... 8O

User avatar
KSF
Posts: 325
Joined: Fri 07 Feb 2014, 15:07
Location: Western Cape

Re: MkII Cortina Perana V6 racer

Post by KSF » Thu 12 Jan 2017, 16:51

Back from leave and slowly getting over the shock to the system of having to be at work again. :? :x

KR, the day job interferes for sure! Pity it is required to fund everything... I have been wondering how to race them both (one day if and when they both run) at the same event. Maybe if Classics and Fines once again split into two separate races, but even then it is a tall order to get two cars there and ready etc. More likely I will have to decide one day which one to keep and which to sell on.


Work on the cars only sort of just started up again. I needed Monday and Tuesday to get over the post holiday blues. Last night I took off the Sierra's wheels (loaned from the Cortina) and loaded them and the new mags in the car to be swapped over today. Pic below the whole lot is in the back still.
20170112_110136Sm.jpg
20170112_110136Sm.jpg (97.29 KiB) Viewed 6185 times
So tonight they can go on and hopefully will give me enough clearance to the arches. I also took out the front struts again, have to adjust the rideheight by quite a bit and I hope I can still get it done with the springs I have. I might have to give up on the big springs and convert to the small diameter springs as it just makes it much easier.

User avatar
IndianaJones
Posts: 4866
Joined: Sun 23 Aug 2009, 17:39
Location: Citrusdal, RSA

Re: MkII Cortina Perana V6 racer

Post by IndianaJones » Sun 05 Feb 2017, 13:28

Is there now two Swanepoel Cortina Mk2 tribute cars?

User avatar
Shauns
Posts: 62
Joined: Wed 20 Oct 2010, 09:45
Location: Debbin

Re: MkII Cortina Perana V6 racer

Post by Shauns » Mon 06 Feb 2017, 10:23

KSF , Absolutely fantastic thread. A wealth of info,

A question on the Uno pickup and module, I located the module and pickup sensor in a local spare shop however the chopper/rotor no one seems to know where to get them? any help?

A comment on wheels, I have a 2.0 i GLE auto, and on the 17"s wheels it is a bit slugissh. The 16's do run a lot better, with a 195/45 on front and 205 /45 at rear. I managed to get my auto down to 180 on the flat before the gearbox limited out. These are the old Hockenheim 1. Their offset is perfect for the Sapphire albeit a bit of a heavy rim.
Can't do that with the 17s. These modern China made wheels buckle easily , and clear goes yellow very quick. (Cant be teh dogs pee)
2014 Toyota Fortuner D4D (current)
2005 Toyota Tazz 130 (current)
1989 Ford Sapphire 2.0i GLE - FSH - Grosvenor Pinetown - In Storage for now.
1977 Ford Mk 2 Escort 4 door - Kent Screamer - In progress

User avatar
KSF
Posts: 325
Joined: Fri 07 Feb 2014, 15:07
Location: Western Cape

Re: MkII Cortina Perana V6 racer

Post by KSF » Mon 06 Feb 2017, 10:45

IndianaJones wrote:Is there now two Swanepoel Cortina Mk2 tribute cars?
Not that I know of? Did you see another one somewhere? I know Arnold Lambert recently bought the Poulter Gunston car, so it should be down here in the Cape somewhere now.

User avatar
KSF
Posts: 325
Joined: Fri 07 Feb 2014, 15:07
Location: Western Cape

Re: MkII Cortina Perana V6 racer

Post by KSF » Mon 06 Feb 2017, 10:57

Shauns wrote: A question on the Uno pickup and module, I located the module and pickup sensor in a local spare shop however the chopper/rotor no one seems to know where to get them? any help?
I have not found out where the chopper comes from no. Maybe a call to that shop in JHB will help? It was mentioned in the thread about the conversion, think it was under 'Technical'.

The Sierra/Sapphire seems happiest with an overall wheel diameter between 580 and 600mm. How one gets there is probably less important, but a 17" with so little rubber on is just looking for buckles and dents on the average SA roads. I do see them with 195/40 rubber on regularly though. Happy medium/compromise is probably a 205/50x15, or 205/45x16.

User avatar
IndianaJones
Posts: 4866
Joined: Sun 23 Aug 2009, 17:39
Location: Citrusdal, RSA

Re: MkII Cortina Perana V6 racer

Post by IndianaJones » Mon 06 Feb 2017, 14:11

KSF wrote:Did you see another one somewhere?
Saturday, Passion for Speed. Thought it was your car, 'till I realized it's a 2 door.
Attachments
SwanepoelCortina.JPG
SwanepoelCortina.JPG (126.66 KiB) Viewed 6010 times

bmwmaniac
Posts: 307
Joined: Fri 05 Jun 2015, 21:02
Location: strand

Re: MkII Cortina Perana V6 racer

Post by bmwmaniac » Mon 06 Feb 2017, 18:29

you can buy a complete brand new UNO distributer from autozone for R600
"If you park your car, walk away and don't look back, you're driving the wrong car"
Image

Post Reply

Social Media

     

Who is online

Users browsing this forum: No registered users and 20 guests