Albie's Introduction.
Forum rules
Please the introduction first.
When posting topics on the forum please make sure:
Please the introduction first.
When posting topics on the forum please make sure:
- ● The posts are not political
- ● The posts are not about religion
- ● Please keep posts civil and don't be nasty to other members
- albiekreef
- Posts: 20
- Joined: Mon 04 Apr 2016, 22:00
- Location: Loeriesfontein
Re: Albie's Introduction.
Jip already put in my order at oom David and oom Gideon for the cosworth one.
Sent from my SM-A500F using Tapatalk
Sent from my SM-A500F using Tapatalk
Re: Albie's Introduction.
Welcome to the forum. That's a very neat and tidy Sierra.
Alfa GTV 3.0
Ford Capri Perana V8
Chevy Lumina Supercharged
Wait not for tomorrow to do what can be done today, live each day for one knows not what the next day may hold.
Ford Capri Perana V8
Chevy Lumina Supercharged
Wait not for tomorrow to do what can be done today, live each day for one knows not what the next day may hold.
- albiekreef
- Posts: 20
- Joined: Mon 04 Apr 2016, 22:00
- Location: Loeriesfontein
Re: Albie's Introduction.
Thank you very much. Got a few dents and little rust spots that irritates me but all will be fixed up good in time.ZA Perana wrote:Welcome to the forum. That's a very neat and tidy Sierra.
Sent from my SM-A500F using Tapatalk
Re: Albie's Introduction.
Hullo Albie,
Time and Patience! In my second year with the Opel and still a lot of work to be done!!
Groete Johann
Time and Patience! In my second year with the Opel and still a lot of work to be done!!
Groete Johann
Member No: 209
Ah! Yes I remember it well! (Only GM's!)
1966 Opel Rekord L CLASSIC SEDAN Current Project
Ah! Yes I remember it well! (Only GM's!)
1966 Opel Rekord L CLASSIC SEDAN Current Project
- albiekreef
- Posts: 20
- Joined: Mon 04 Apr 2016, 22:00
- Location: Loeriesfontein
Re: Albie's Introduction.
Dankie JohannJohann65 wrote:Hullo Albie,
Time and Patience! In my second year with the Opel and still a lot of work to be done!!
Groete Johann
Ek is nou al so 5 jaar besig met die beplanning en navorsing van als wat ek wil doen. Kort kort duik iets nuuts op of iets loop skeef. Is nou in my finale aanloop. Al wat my nou nog n bietjie terughou is die agterste briek calipers en ook of ek n fuel injection top moet soek....oorweeg dit om my een top te laat aanpas by die efi intake se injector lobes.
Tyd sal wel alles bekend maak.
Groete
Albie
Sent from my SM-A500F using Tapatalk
Re: Albie's Introduction.
Not sure if you already know. ..check under the battery box. The acid eats the metal and water gets into the firewall and carpets and starts to rot
Magic happens.
- albiekreef
- Posts: 20
- Joined: Mon 04 Apr 2016, 22:00
- Location: Loeriesfontein
Re: Albie's Introduction.
Hi ShaunpShaunp wrote:Not sure if you already know. ..check under the battery box. The acid eats the metal and water gets into the firewall and carpets and starts to rot
Yep....already had that problem. Removed everything and had it fixed up quite good but only temporarily. Gonna strip it completely for a complete rust, dent and spray overhaul.
Thanks for pointing that out though....I knew this forum was gonna have some great people with a lot of great info.
Thanks guys.
Sent from my SM-A500F using Tapatalk
- albiekreef
- Posts: 20
- Joined: Mon 04 Apr 2016, 22:00
- Location: Loeriesfontein
Re: Albie's Introduction.
Guys I need help seriously. Where will I find parts for the brake calipers ? Rattle plates and guide pins for the rear calipers and all new rubber seals and grommets for front and rear calipers ?
Sent from my SM-A500F using Tapatalk
Sent from my SM-A500F using Tapatalk
Social Media
Who is online
Users browsing this forum: No registered users and 4 guests